Stainless Steel Tape
Principal Uses
Metal-tape.com's stainless steel tape is a non-magnetic tape made from 304 stainless steel. It is ideal for use in decorative, marine, food processing and nuclear applications. It employs a stainless steel substrate (this is the tape surface). The adhesive is made from acrylic, giving it a strong bond. A liner is included on the adhesve to make the tape easier to unwind and apply.
Features
The service temperature range is -30 to +250F (-34C to +121C) and due to the high performance adhesive qualities, can be applied in low temperature environments. The aggressive acrylic adhesive creates a superior bond to metals and other non-porous surfaces.
This stainless steel tape is RoHS compliant.
Surface Preparation / Application
Surface should be dry, clean and free of contaminants prior to tape application. As with all pressure-sensitive adhesive system products, use firm pressure when applying tape. Best adhesion typically occurs over 24 hours; maximum adhesion 1 week.
NOTE: USE CAUTION WHEN APPLYING THIS TAPE. The 2 mil thickness of the tape can act like a knife-edge and can easily cut skin/flesh.
Stainless Steel Tape Part Numbers and Pricing
Metal-tape.com's stainless steel tape is a non-magnetic tape made from 304 stainless steel. It is ideal for use in decorative, marine, food processing and nuclear applications. It employs a stainless steel substrate (this is the tape surface). The adhesive is made from acrylic, giving it a strong bond. A liner is included on the adhesve to make the tape easier to unwind and apply.
Features
The service temperature range is -30 to +250F (-34C to +121C) and due to the high performance adhesive qualities, can be applied in low temperature environments. The aggressive acrylic adhesive creates a superior bond to metals and other non-porous surfaces.
This stainless steel tape is RoHS compliant.
Surface Preparation / Application
Surface should be dry, clean and free of contaminants prior to tape application. As with all pressure-sensitive adhesive system products, use firm pressure when applying tape. Best adhesion typically occurs over 24 hours; maximum adhesion 1 week.
NOTE: USE CAUTION WHEN APPLYING THIS TAPE. The 2 mil thickness of the tape can act like a knife-edge and can easily cut skin/flesh.
Stainless Steel Tape Part Numbers and Pricing
| 2 mil Lined Stainless Steel Tape sizes | ||||
| Part Number | Decimal Width | Fractional | Roll Length | |
| VT304L-0500 | 0.500" | 1/2" | 18 yards | |
| VT304L-0750 | 0.750" | 3/4" | 18 yards | |
| VT304L-1000 | 1.000" | 1" | 18 yards | |
| VT304L-1500 | 1.500" | 1-1/2" | 18 yards | |
| VT304L-2000 | 2.000" | 2" | 18 yards | |
| VT304L-3000 | 3.000" | 3" | 18 yards | |
Need a different width than what is listed here or ready to buy? Contact us! This stainless steel tape can be slit to the exact width you need, from 1/2" width to 22" wide.
NOTE: Metal-Tapes.com is a site owned and maintained by Viadon.com.
Tape specifications
NOTE: Metal-Tapes.com is a site owned and maintained by Viadon.com.
Tape specifications
| Technical Data for Stainless Steel Tape | ||
| Category | Data | Test Method |
| Substrate | Type 304 Stainless Steel | N/A |
| Adhesive | Acrylic (clear) | N/A |
| Foil Thickness | 2.0 mils | PSTC-33 ASTM D3652 |
| Tape Thickness (w/o liner) | 4.0 mils | PSTC-33 ASTM D3652 |
| Tape color | Silver metallic | Visual |
| Adhesion to Steel | 64 oz/inch (49N/100mm) | PSTC-1 ASTM D3330 |
| Tensile Strength | 150 lbs/inch (2.627N/100mm) | PSTC-31 ASTM D3759 |
| Elongation | 1% | PSTC-31 ASTM D3759 |
| Release Liner | 4.0 mils | PSTC-33 ASTM D3652 |
| Permeance | 0.0 Perms | ASTM E-96 |
| MilSpec/Military Specification | MIL-S-5059 (substrate only) | ASTM A240 |
Data sheet for stainless steel tape
| 2millinedstainlessdata2021.pdf |
Made in the USA
We support Americans working in America by only purchasing, slitting and die cutting American-made foil/metal tapes. All of the tapes on this site are slit and/or die cut in-house at our converting facility based near Chicago IL.
NOTE: It is the customer's responsibility to test a sample (we provide FREE samples of all of these tapes) of the tape to determine suitability. All tape is custom-slit to width and it not returnable after order, unless found to be defective.
We support Americans working in America by only purchasing, slitting and die cutting American-made foil/metal tapes. All of the tapes on this site are slit and/or die cut in-house at our converting facility based near Chicago IL.
NOTE: It is the customer's responsibility to test a sample (we provide FREE samples of all of these tapes) of the tape to determine suitability. All tape is custom-slit to width and it not returnable after order, unless found to be defective.